
The short answer: new windows cost about $400 to $900 per window installed for standard vinyl, and roughly $300 to $2,500 each once you factor in material, size, and glass. A whole-home job of 10 to 15 windows in Ventura usually lands somewhere between $5,000 and $18,000. That is a wide range, and yes, that is annoying — so let's break down exactly what moves the number.
Here's the part nobody says out loud at the showroom: a "window" is really three prices stacked together — the unit itself, the glass package, and the labor to set it right. Change any one and the total swings. Below is what each piece actually costs in coastal Ventura County, in plain numbers.
What "installed" actually includes
When we quote a window installed, that price covers the unit, the labor, flashing and sealing the opening, and hauling the old window away. A window you buy off a shelf for $250 is not an installed price — it is a part. Budget for the whole job, not the sticker.
Rule of thumb: labor runs $100 to $300 per window on a standard replacement, more for second-story openings or anything the crew has to wrestle out of an old frame.
Cost by frame material
Material is the biggest single lever on price. Vinyl is the value pick most people land on; wood is the priciest and the neediest. Here's the installed range per window:
| Frame material | Installed cost per window | Best for |
|---|---|---|
| Vinyl | $400–$900 | Most homes; low upkeep, good insulation |
| Aluminum | $450–$1,200 | Storefronts, modern looks; conducts heat |
| Fiberglass | $700–$1,500 | Long life, handles heat and humidity well |
| Wood | $800–$1,800 | Historic homes; needs sealing and upkeep |
Vinyl wins on price and needs basically no maintenance, which is why it's the default across coastal Ventura County. Fiberglass costs more but shrugs off heat and swelling better than anything, so it's worth a look if you plan to stay 15-plus years. Wood is gorgeous and expensive and will remind you it's wood every time it needs resealing.
Cost by window type
The style of window matters almost as much as the frame, because more moving parts and bigger glass mean more money. These are installed ranges for standard vinyl units:
| Window type | Installed cost per window |
|---|---|
| Single-hung | $350–$700 |
| Double-hung | $450–$900 |
| Sliding | $400–$900 |
| Casement | $500–$1,100 |
| Bay or bow | $1,200–$4,500 |
Single-hung is the cheapest because only the bottom sash moves. Double-hung costs a bit more and both sashes tilt in, which you'll appreciate the first time you clean the outside from inside. Casements crank open and seal tight, great for catching a breeze. Bay and bow windows are their own animal — you're buying three or more units plus a projecting frame and, often, structural work, so they can run several thousand on their own.
Cost by size
Bigger openings use more glass and more labor, so a standard window can double in price just by growing. A common 3-by-5-foot double-hung might run $450 to $700 installed; a large picture window or a custom oversized opening can climb past $1,500. Non-standard shapes (arches, circles, anything the factory has to build one-off) carry a custom surcharge on top.
The glass package — where Ventura homeowners overspend
This is the upgrade that quietly runs the bill up, and it's also where you can save real money by not buying more than the climate needs.
- Double-pane low-E with argon is the standard, and it's the right call for almost everyone. It blocks heat, cuts UV that fades your furniture, and costs a fraction of the premium options.
- Impact-rated (hurricane) glass runs $650 to $1,200 per window installed. Near the coast it's not optional — it meets code and protects against wind-borne debris. Inland, it's a nice-to-have you probably don't need.
- Triple-pane is where I'll plant a flag: in a warm CA climate, you rarely need triple-pane. It's built for northern winters, adds real cost, and buys you almost nothing against heat that a good double-pane low-E doesn't already handle. Save the money and put it toward better installation instead.
The other factors that move the price
A few things that aren't the window itself but land on the invoice:
- Full-frame vs. insert. Dropping a new window into a sound existing frame (an insert) is cheaper. Tearing back to the studs (full-frame) costs more but is the honest fix when the frame is rotted or you're changing the size.
- Second-story and hard-to-reach openings. Ladders and lifts add labor.
- Old-home surprises. Homes with settled framing or lead paint take longer and cost more, and any installer who says otherwise before seeing it is guessing.
- How many at once. Batching the whole house lowers the per-window labor, because the crew mobilizes and disposes once instead of five times.
When you don't need new windows at all
Here's the advice that costs us a job and earns your trust: not every bad window needs replacing. If a double-pane unit has fogged up between the glass but the frame is solid, that's usually a failed seal — you can often swap just the insulated glass unit for far less than a full replacement. A sash that won't stay up is frequently a $20 balance, not a $600 window.
If your windows are single-pane, drafty, or painted shut since the Bush administration, replacement is the right move. If they're structurally fine and only cosmetically tired, get a repair quote before a replacement one. An honest installer will tell you which camp you're in.
You know the room. The one that's an oven by 3 p.m. in July and a meat locker come January, where the AC runs nonstop and never quite wins. That room is usually leaking cash through old glass, and it's the first place new low-E windows earn their keep. Start there if you're phasing the work.
So what should a Ventura homeowner budget?
- Standard vinyl, whole home (10–15 windows): roughly $5,000 to $13,500.
- Add impact glass for a coastal home: figure closer to $8,000 to $18,000.
- A single problem window: $400 to $900 for standard, more for specialty shapes or impact glass.
Most whole-home jobs in coastal Ventura County wrap in one to two days once the windows arrive. The measuring and the manufacturing lead time are the long part, not the install.
The honest bottom line: pick double-pane low-E, choose vinyl unless you have a reason not to, replace the worst rooms first if money's tight, and skip the upsells the climate doesn't call for. Windows are one of the few home upgrades that pay you back a little every month on the electric bill — get them installed right and they'll do it for 20-plus years.
If you want a firm number for your house instead of a range from the internet, Ventura Window Replacement gives free, itemized quotes across Ventura and coastal Ventura County — on vinyl replacement windows, energy-efficient low-E units sized for the heat, and double-hung units when you want the classic look. Call (844) 511-2320 and we'll measure before we quote.
Ready for a free quote in Ventura?
Ventura Window Replacement — free estimate, clear scope, no pressure. Use the form on this page or jump to the homepage quote.
Related services in Ventura
Ventura Window Replacement money pages — go straight to the service you need.
- Energy-Efficient Window Replacement →
The U-factor printed on a window label assumes the wall around it stays dry. In Ventura that assumption gets tested every winter, and soaked framing carries heat out of a house far faster than the batt insulation it ruined on the way through.
- Vinyl Window Installation →
On a vinyl window the nailing fin is extruded as part of the frame, about a tenth of an inch of PVC standing proud of the jamb. On most Ventura installs that thin flange is the waterproofing, and how it gets bedded decides whether the wall behind it stays dry.
- Double-Hung & Single-Hung Sash →
A double-hung seals along a horizontal check rail where the two sash meet. Drive rain up that joint at an angle and it becomes the weakest line in the whole window, which is why our first question is always which wall the opening sits on.
- Fiberglass Window Replacement →
Fiberglass frames arrive with an applied nailing flange rather than an extruded one, so there is a factory joint between flange and frame. That joint can be inspected in your driveway, which is worth doing before a unit disappears into a wall for thirty years.
- Clad-Wood & Wood Windows →
The first sign a clad-wood window went in without a sill pan is a dark stain in one interior sill corner, almost always the windward one. By the time it shows, water has sat in that assembly for a season and the repair is no longer a window job.
Frequently asked questions
How much on average do new windows cost?
Most homeowners in Ventura pay about $400 to $900 per window installed for a standard vinyl replacement. Fiberglass and wood run higher, and impact-rated glass adds a premium. That price includes the window, labor, flashing, and haul-away of the old unit.
What is the average cost of replacing 10 windows in a home?
Ten standard vinyl windows in Ventura typically land between $4,500 and $9,000 installed. Bigger openings, specialty shapes, or impact glass push it higher. Doing all ten at once usually beats replacing a few at a time, since the crew mobilizes once. Call (844) 511-2320 for a firm, itemized quote.
Is it worth replacing 20 year old windows?
Usually yes, if they are drafty, foggy between the panes, or painted shut. Twenty-year-old single-pane or failed double-pane units leak cooling all summer, and new low-E glass often pays part of itself back in lower bills. If the frames are sound and only a seal failed, a repair may be all you need.
What time of year are windows the cheapest?
Late fall and winter are usually the slow season, so lead times shrink and some installers discount to keep crews busy. In Ventura, scheduling outside peak summer also means you are not tearing out a window on the hottest day of the year.
Is it cheaper to replace all my windows at once?
Per window, yes. The crew shows up, sets up, and disposes of old units once instead of five times, so batching lowers the labor cost on each opening. If the budget is tight, replacing the worst rooms first is a fine middle ground.
Local context
How this applies in Ventura, CA
Every article here is written from window work done in Ventura and coastal Ventura County, so the numbers reflect local labour, permit and material costs rather than a national average. Your own job can land either side of them depending on access, the condition of what is already there, and the materials you pick — one-piece back-dammed sill pans, AAMA 711 self-adhered flexible flashing, nailing fins bedded in butyl sealant.
The way to turn any of this into a real answer is to have someone look at your actual situation. The free estimate is free, itemized and written down, with no deposit and no obligation. Call (844) 511-2320 or start on the Ventura Window Replacement homepage.
Areas Ventura Window Replacement covers
Ventura first, then the surrounding communities of coastal Ventura County. Each has its own page with local detail rather than a copy of this one:
- Oxnard, CA — Ventura, population 202063
- Camarillo, CA — Ventura, population 70741
- Santa Paula, CA — Ventura, population 30657
- Port Hueneme, CA — Ventura, population 21954
- Fillmore, CA — Ventura, population 16419
- Ojai, CA — Ventura, population 7637
Or jump to the full list of Ventura services.
More from the Ventura Window Replacement blog
- How Long Does Window Replacement Take in Ventura?
How long window replacement takes in Ventura, CA — 30 to 60 minutes per window on install day, but weeks of lead time first.
- Window Fogging Between Panes in Ventura: Fix It?
Fogging between window panes in Ventura, CA — why the seal failed, glass-only repair cost, and the warranty most people never claim.
- Vinyl vs Fiberglass Windows for Ventura Homes
Vinyl vs fiberglass windows in Ventura, CA — the real price gap, thermal expansion, and when the cheaper frame is the right call.
The Ventura Window Replacement Team
Licensed window pros in Ventura, CA
Written by the Ventura Window Replacement team — licensed, insured window pros serving Ventura, CA and the surrounding area.